Prev

All Tapered

Next
Here they are, all tapered, with the bolt heads faced and cleaned up. I couldn't get the bolt heads to come out with a clean finish on the lathe, so I used a good old fashioned file, followed by a few swipes with some varying grades of sandpaper. I used 320, 600, and 800 grit sandpapers (one after the other) and wound up with a pretty nice finish. The second and forth bodies from the left were sanded on the lathe. The first and third ones were left as-is. Bigger...
Prev Index Next

Home - Machinist - Projects - Index

Copyright 2010 by Dave Hylands